1523 Dexin Building, Yangzhou,
In the previous section, we introduced several common failures of the chain conveyor belt and how to repair the fault. Here we look at the relevant information:
First, when the chain conveyor belt is not used for a long time, it needs to be rolled up and stored well. It cannot be stored in disorder, and it must not be folded. Otherwise, it may damage or break it. of.
Second, in order to save money, some merchants use different types of conveyor chains to use together. This will not only affect the work efficiency, but also damage the conveyor chain plates. To ensure its real use effect.
Thirdly, in the daily work, when using chain conveyor belts, it is necessary to prevent the contact with some acid-alkaline liquids, and it is not possible to irradiate in too strong sunlight or to soak in rainwater. Will have a corrosive effect on the chain conveyor.
Fourth, when it is stored in a warehouse, it has a most suitable storage temperature. In general, between 18°C and 40°C, the humidity in the air needs to be controlled between 50% and 80%. If the temperature is too high or the humidity is too high, it will affect the use and storage of the conveyor chain. It is not conducive to the use of the conveyor chain, it will only shorten its useful life. When encountering such a situation, everyone needs to be careful to save it, of course, daily maintenance is also essential, so that it can extend its useful life, in use, to ensure that it can operate normally